|
|
Standard No.: Q/DJ11-106-2000
|
 |
6023 is biaxially oriented polyethelene terephthalate(PET) flame-resistive film.
6023 has good electrical insulating property, mechanical property, dimensional stability and flame resistance
1 Technical requirements
1.1 Appearance
The film is supplied in roll form. Its surface should be flat and smooth. The film should be free of defects such as creases, laceration, dents, bubbles, holes, and contaminations. Edges of tapes must show clean cuts.
1.2 Film roll, core
As per Item 4.2, 4.3, 4.4 of GB/T 13542-1992.
1.3 Dimension
1.3.1 Thickness and tolerance
50μm 、75μm 、100μm、125μm、150μm、188μm、200μm、250μm。
Special requirements for thickness can be settled upon negotiation between sellers and buyers.
Recommended nominal thickness is as follows: 50μm 、75μm 、100μm、125μm、150μm、188μm、200μm、250μm.
Nominal thickness: ≤100μm Thickness tolerance: ±5%
Nominal thickness: ＞100μm Thickness tolerance: ±4%
1.3.2 Splices and minimum length
Usually the splices and minimum length are as shown in Form 1.
Form 1 The splices and minimum length
|
Splices |
Weight (kg) |
Min. length(m) |
|
0 |
≤70 |
-------- |
|
≤1 |
>70 |
≥150 |
The splices and minimum length can be settled upon negotiation between sellers and buyers.
1.3.3 Diameter, width and deviation
Nominal width: 500mm & 1000mm
Special requirements for width can be settled upon negotiation between sellers and buyers. The film can be supplied in tape. The deviation of diameter and width is as shown in Form 2:
Form 2 The deviation of diameter and width mm
|
Width |
Diameter |
Deviation |
|
|
Width |
Outside diameter of roll |
||
|
8～150 |
180～250 |
±0.5 |
＜0.5 |
|
>150 |
>250 |
±1.0 |
＜1.0 |
1.4 Property requirements
Properties are as shown in Form 3
Form 3 Properties of flame-resistive film
|
No. |
Properties |
Units |
Values |
|
|
1 |
Tensile strength(MD and TD) |
50μm～100μm |
MPa |
≥150 |
|
>100μm～190μm |
≥140 |
|||
|
>190μm |
≥110 |
|||
|
2 |
Elongation at break(MD and TD) |
50μm |
% |
≥60 |
|
>50μm |
≥80 |
|||
|
3 |
Shrinkage (MD and TD) |
50μm～190μm |
% |
≤3.0 |
|
>190μm |
≤2.0 |
|||
|
4 |
Power electric strength |
V/μm |
Be as shown in Form 4 |
|
|
5 |
Volume resistivity |
Ω·m |
≥1.0×1014 |
|
|
6 |
Relative dielectric constant (50Hz) |
/ |
2.9～3.4 |
|
|
7 |
Dielectric dissipation factor (50Hz) |
/ |
≤５.0×10-3 |
|
|
8 |
Density |
kg/m3 |
1400±10 |
|
|
9 |
Melting point |
℃ |
≥２５６ |
|
|
10 |
Surface resistivity |
Ω |
≥1.0×101３ |
|
|
11 |
Flame resistance |
/ |
94VTM-2 |
|
Form 4 Power electric strength of film
|
Nominal thickness，μm |
Values，V/μm |
|
50 |
≥130 |
|
75 |
≥105 |
|
100 |
≥90 |
|
125 |
≥75 |
|
150 |
≥70 |
|
188 |
≥65 |
|
250 |
≥60 |
2 Testing methods
As per chapter 5 of GB 13950-1992 and chapter 5 of ANSI/UL94－1985.
3 Inspection
3.1 Inspection items are as per Clause 1.1, 1.2, 1.3 and Item 1, 2, 3, 4 and 11 in Form 3 of Clause 1.4;
3.2 Other items are as per Chapter 6 of GB13950-1992.
4 Marks, package, transportation and storage
As per Chapter 7 of GB 13950-1992
5 Remarks
5.1 The film is suitable for electrical insulation of flame resistive electric motor and electric apparatus.
5.2 Avoid creases, scratches, contamination of dust and oil while being slit
and/or used.