J5660-1 J5660-1S MICANITE HEATER PLATE
Applications:
The heater plate is produced by bonding mica paper sheets with silicone adhesive under compression. It is rigid and can be punched or stamped cleanly to specified design with a heat-resisting capacity up to 500℃.It can be used as skeleton material of electrical heating elements, dielectric spacer at elevated temperature. Model J5660-1 rigid mica plates, are applied to ordinary electric heaters while J5660-1S are applied to baking equipments.
Specifications: Area
1000mm X 1200mm,1000mm X 600mm
Thickness
0.1-1.5mm
Appearance
Smooth surface, free from pinholes, bubbles, diro particles, and any laminate splitting.
Technical specification
|
No. |
Item |
Unit |
Data |
Testing Method |
|
|
J5600-1 |
J5660-1S |
||||
|
1 |
Percentage of splitting |
% |
≤3 |
≤3 |
GB5019-85 |
|
2 |
Operating frequency |
MV/m |
≥20 |
≥20 |
GB5019-85 |
|
3 |
Volume resistivity (normal) |
ΩM |
≥1 X 1012 |
≥1 X 1012 |
GB5019-85 |
|
4 |
Loss on heating |
% |
≤2.0 |
≤1.0 |
GB5019-85 |
|
5 |
Flame-resisting capacity |
grade |
94V-0 |
94V-0 |
UL94 |
|
6 |
Smoke on ignition |
S |
≤40 |
Petter |
|
Packing
The rigid mica plates for heaters are packed in paper boxes after sealed with plastic films and then every ten boxes are packed on a pallet. The packing list is shown below:
|
thickness |
Sheets/Box |
Sheets/Pallet |
|
0.15 |
260 |
2600 |
|
0.2 |
200 |
2000 |
|
0.3 |
130 |
1300 |
|
0.4 |
100 |
1000 |
|
0.5 |
80 |
800 |
|
0.6 |
70 |
700 |
|
0.7 |
60 |
600 |
|
0.8 |
50 |
500 |
|
0.9 |
45 |
450 |
|
1.0 |
40 |
400 |
Storage
The rigid mica plates for heaters can be stored for one year after their arrival at destination.